Maintenance on your
entry door is essential to keep it looking as beautiful as possible and making sure
you don’t have to replace them more frequently than usual. Different
materials require a different kind of maintenance and this is everything
you need to know!
Once or twice a year, wash the outside of your door with a mild detergent.
It is a good idea to apply a liquid silicone wax at the same time you
wash the door. A liquid car wash & wax product that does both in one
step works wonders and can be found at most auto part stores.
Meguiar’s Ultimate Wash and Wax is a great option!
Remember this rule: If you can use it on your car, you can use it on your door.
If your area uses salt on the roads in the in the winter and your door
gets wet, you should rinse the bottom of your door clean to prevent the
salty water from hurting your product.
We also recommend that you don’t use a paste wax. Paste waxes tend
to dry in the wood grain texture and beveled edges of the door and are
difficult to buff out. This leaves behind a dried residue in the low spots
which will ruin the aesthetic appeal of your door.
Apply the clear coat/paint annually or every other year depending upon
the amount of sunlight your door receives. The clear coat is a two-part
urethane to protect from the sun’s UV rays.
Finish is usually available in pint or gallon size from the manufacturer
or a paint shop. We suggest using a water based clear coat. If the clear
coat is not maintained, the sun will damage your door similar to a “sun
burn” causing it to peel and pull off the stain finish in the process.
The only way to repair this damage is stripping the door completely. Consistent
maintenance will prevent this extreme damage from happening.
Wipe away dust and dirt monthly with furniture polish. On painted wood
doors periodically check for blistering, cracking or peeling, particularly
around any fixtures on the door.
The painted surface keeps water from damaging the wood. If the paint is
coming away or is not sealed, water can soak into the wood and damage
it over time.
If your door has a stained finish, check to see if it is still water repellent.
If the door is becoming discolored, and water soaks into the wood, it
is time to refinish the door. There are chemical treatments on the market
that will rejuvenate discolored wood, for example polyurethane clear coat.
Thomas V. Giel Garage Doors serves a 50-mile radius around Pittsburgh.
We handle all your needs when it comes to entry doors! We also provide
that are installed in front of the entry door to protect it.